DH-Budenberg CPB3800HP Hydraulic Deadweight Tester

The DH-Budenberg CPB3800HP deadweight tester is a stand-alone, high pressure primary standard for laboratory or on-site pressure calibrations to
40,000 psi (2600 bar). Featuring high accuracy, a wide measuring range and portability, the CPB3800HP is an ideal reference instrument for the testing,
adjustment and calibration of pressure measuring instruments. Dead-weight testers are the most accurate instruments available on the market for the calibration of electronic or mechanical pressure measuring
instruments. The DH-Budenberg CPB3800HP is accurate up to 0.007 % of reading. With integrated (hydraulic) pressure generation and a purely mechanical
measuring principle, there is no electrical power required for operation and the unit can be used anywhere as it’s accurate enough for the lab and
portable enough for on-site testing. The DH-Budenberg CPB3800HP deadweight tester incorporates a base, including a pump, a piston-cylinder system, and a graduated precision mass set. The
masses are applied in proportion to the target pressure and the pressure is set via the integrated, finely adjustable, precision spindle pump. As soon
as the measuring system reaches equilibrium, there is a balance of forces between pressure and the force generated by the mass applied over the area
of the piston. The quality of the piston / cylinder system ensures that this pressure remains stable over several minutes so that the device under
test can be calibrated or adjusted. The dual-range piston-cylinder system offers two measuring ranges in one case with automatic measuring range switching from low-pressure to high-pressure
pistons. This provides the user with an extremely flexible measuring instrument that can cover a wide measuring range with high accuracy, with only one
piston-cylinder system and one mass set. Additionally two test points can automatically be achieved by the operator loading masses once. The overall design of the DH-Budenberg CPB3800HP deadweight tester and the very precise manufacturing of both the piston and the cylinder, ensure exceptionally
low friction force, which results in excellent operating characteristics with long free-rotation time and low sink rates. Thus a high long-term stability
is ensured. The piston and cylinder are manufactured from hardened steel and tungsten carbide, respectively. This pairing of materials has very low pressure
and temperature coefficients of expansion, which results in a very good linearity for the effective area and a very high accuracy.